Manufacturing Technology 2015, 15(3):392-396 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/3/392

Research on Constructional Shape of Bond at Connecting Galvanized Sheet of Metal

Miroslav Müller
Faculty of Engineering, Czech University of Life Sciences Prague. Czech Republic

A constructional shape of an adhesive bond deals with a mutual position of bonded parts in such way to gain a given contact area. The constructional shape of the adhesive bond finds a practical application at connecting of plain areas that means sheets of metal above all. The adhesive bond strength at connecting the galvanized sheet of metal was significantly lower than at connecting a constructional carbon steel. Results of specimens of wavy-lap bonds showed higher values of the adhesive bond strength comparing with specimens of single-lap bonds. The wavy-lap constructional adjustment proved to be positive at connecting the galvanized sheet of metal. The increase of the adhesive bond strength ranged in the interval 27 to 560 %. The difference in using specimens A (single-lap bond) and B (wavy-lap bond) is obvious from the statistical comparison. It is visible from performed experiment that using the specimen B (wavy-lap bond) led to increasing of strength values of the adhesive bond.

Keywords: Adhesive bond, deformation of adherent, two-component epoxy adhesives, testing

Published: June 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Müller M. Research on Constructional Shape of Bond at Connecting Galvanized Sheet of Metal. Manufacturing Technology. 2015;15(3):392-396. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/3/392.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. ÁVILA, A. F., BUENO, P. (2003). Stress analysis on a wavy-lap bonded joint for composites. In: International Journal of Adhesion & Adhesives, Vol. 24, pp. 407-414. Go to original source...
    2. BANDEKAR, J., FENTON, J., GOLDEN, M., MEYERS, G., ROBINSON, A., YAN, B., HENG, C. (2009): Adhesive bondability of advanced high strength steels with galvannealed zinc. In: Materials Science and Technology Conference and Exhibition 2009, Vol. 2, pp. 722-749.
    3. MESSLER, R., W. (2004). Joining of materials and structures from pragmatic process to enabling technology. Burlington: Elsevier, 816 pp. Go to original source...
    4. MÜLLER, M., HERÁK, D. (2010). Dimensioning of the bonded lap joint. In: Research in Agricultural Engineering, Vol. 2, pp. 59-68. Go to original source...
    5. ADAMS, R. D., COMYN, J., WAKE, W. C. (1997). Structural adhesive joints in engineering. 2nd ed. Chapman & Hall, London. 360 pp.
    6. HABENICHT, G. (2002). Kleben: Gundlagen, Technologien, Anwendung. Berlin: Springer. 921 pp. Go to original source...
    7. GRANT, L. D. R., ADAMS, R.D, DA SILVA, L.F.M (2009). Experimental and numerical analysis of single-lap joints for the automotive industry. In: International Journal of Adhesion & Adhesives, Vol. 4, pp. 405-413. Go to original source...
    8. ÁVILA, A. F., BUENO, P. O. (2004). An experimental and numerical study on adhesive joints for composites. In: Composite structures, Vol. 64, pp. 531 - 537. Go to original source...
    9. CAMPILHO, R. D. S. G., DOMINGUES, J. J. M. S. (2009): Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes. In: International Journal of Adhesion & Adhesives, Vol. 29, pp. 195 - 205. Go to original source...
    10. FESSEL, G., BROUGHTON, J. G., FELLOW, N. A., DURODOLA, J. F., HUTCHINSON, A. R. (2007). Evaluation of different lap-shear joint geometries for automotive applications. In: International Journal of Adhesion & Adhesives, Vol. 7, pp. 574-583. Go to original source...
    11. MÜLLER, M. (2013). Research of renovation possibility of machine tools damage by adhesive bonding technology. In: Manufacturing Technology, Vol. 4, pp. 504-509. Go to original source...
    12. NOVÁK, M. (2011). Surface duality hardened steels after grinding. In: Manufacturing technology, Vol. 11, pp.55-59. Go to original source...
    13. HOLE©OVSKÝ, F., NÁPRSTKOVÁ, N., NOVÁK, M. (2012). GICS for grinding process optimization. In: Manufacturing technology, Vol. 12, pp. 22-26. Go to original source...
    14. JÓZWIK, J., KURIC, I., SÁGA, M., LONKOWIC, P. (2014). Diagnostics of CNC machine tools in manufacturing process with laser interferometer technology. In: Manufacturing technology, Vol. 14, pp. 23-30. Go to original source...
    15. NAKAZAWA, M. (1994): Mechanism of Adhesion of Epoxy Resin to Steel Surfaøe. Nippon steel technical report, pp. 16-22.
    16. YOU MIN, ZHI LI, XIAO-LING ZHENG, SHAN YU, GANG-YAN LI, DE-XIN SUN, (2009): A numerical and experimental study of preformed angle in the lap zone on adhesively bonded steel single lap joint. International Journal of Adhesion & Adhesives, Vol. 29, pp. 280 - 285. Go to original source...

    Return to the content