Manufacturing Technology 2022, 22(1):71-79 | DOI: 10.21062/mft.2022.004

Testing the Effect of Bending Moment on Wheel Bearing Heating

Dana Stancekova ORCID...1, Jozef Mrázik ORCID...1, Miroslava «avodová ORCID...2, Alľbeta Sapietová ORCID...1, Anna Rudawska ORCID...3, Filip Turian1
1 University of Zilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Zilina, Slovak Republic
2 Technical University in Zvolen, ©tudentská 26, 96001 Zvolen, Slovakia
3 Lublin University of Technology, Faculty of Mechanical Engineering, Nadbystrzycka 36, 20-618 Lublin, Poland

Leading manufacturers and sellers of products in the field of rolling bearings for the automotive in-dustry guarantee their quality. Extensive product testing is required to guarantee quality. When test-ing wheel bearings, bending fatigue test stations are used, among other things, to verify the strength of components. The content of the presented work is the analysis of the effect of bending moment on the temperature of a newly wound wheel bearing of the 3rd generation, based on experimental measurements. These are dynamic tests of the strength of wheel bearing components at a resonant test station. This verification is very important and has the effect of preventing the start of mass pro-duction of components that do not meet the basic safety requirements.

Keywords: bending moment; temperature; wheel bearing
Grants and funding:

The article was made under support grant project KEGA 011®U-4/2020 Implementation of online education in the field of bearing technology with an emphasis on the educational process for improving the skills and flexibility of engineering technology students.

Received: August 25, 2021; Revised: January 10, 2022; Accepted: January 26, 2022; Prepublished online: January 28, 2022; Published: February 26, 2022  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Stancekova D, Mrázik J, «avodová M, Sapietová A, Rudawska A, Turian F. Testing the Effect of Bending Moment on Wheel Bearing Heating. Manufacturing Technology. 2022;22(1):71-79. doi: 10.21062/mft.2022.004.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. TODA, K., ISHII, T., KASHIWAGI, S., MITARAI T. (2001) Development of Hub Units with Shaft Clinching for Automotive Wheel Bearings. In. KOYO Engineering Journal. No.158E
    2. KAJIHARA, K. (2005) Improvement of simulation technology for analysis of hub unit bearing. In. Koyo Eng. Engineering Journal. Ed., 167, 35 -39.
    3. SEUNG PYO LEE, JAE HOON KIM AND KI WEON KANG. (2020) Drag torque prediction of automotive wheel bearing seals considering material and geometrical uncertainties using monte carlo simulation. In. International Journal of Automotive Technology, 21 (6), pp. 1447-1453. Go to original source...
    4. KALINCOVA, D., TAVODOVA, M., CIERNA, H., BENO, P. (2017) Analysis of the causes of distortion castings after heat treatment. In. Acta Metallurgica Slovaca, 23 (2), 182-192. Go to original source...
    5. BICEK, M., CONNES, R., OMEROVIC, S., GÜNDÜZ, A., KUNC, R. AND ZUPAN, S. (2020) The Bearing Stiffness Effect on In-Wheel Motors. In. Sustainability, 12 (10), a.n. 4070. Go to original source...
    6. WEI XIONG, YOU WANG, XIAO-PING LI, SONG MEI AND ZHU-XIN (2019) Tian Study on the Forming Process and Deformation Behavior of Inner Ring in the Wheel Hub Bearing Based on Riveting Assembly. In. Materials, 12, a.n. 3785. Go to original source...
    7. KREJCI, L., SCHINDLEROVA, V., BUCKO, M., HLAVATY, I., MICIAN, M. (2019) The Application of PFMEA for Roller Bearings Production. In. Manufacturing Technology, 19(3), pp. 439-445. ISSN 1213-2489 Go to original source...
    8. HODGE, C., STABILE, A., AGLIETTI, G, RICHARDSON, G.(2020) The effect of assembly and stat-ic unbalance on reaction wheel assembly bearing harmonics. In. Ceas space journal, ‏ 13(2), 269-289. Go to original source...
    9. CHENGYI, P., YUANQI, T., GUANQUN, C. (2020) Testing research on friction and wear performance of microstructure surface of unfolding wheel for bearing steel ball detection. In. IOP Conference Series-Materials Science and Engineering, 758, a.n. 012088. Go to original source...
    10. https://autobild.pluska.sk/poradca/zakerna-porucha-aut-nehrozi-aj-vam
    11. VIT, J., NOVAK, M. (2019) Characteristic signal of FT3 measuring probe. In. Manufacturing Technology, 19(1), pp. 168-171 Go to original source...
    12. GÖRÖG, A., GÖRÖGOVÁ, I. (2020) Analysis of the outer surface geometry on drawn tubes. In. Manufacturing Technology, 20(2), pp. 162-169 Go to original source...
    13. JECH, J. (1968) Oceli na valivá loľiska a jejich tepelné zpracovaní. SNTL Praha, p.392.
    14. DURMIS, I. (2000) Tepelné spracovanie loľiskových súčastí z ocele 100Cr6 na bainitickú ątruktúru v podmienkach KLF-ZVL, a.s. Strojnícka fakulta, ®U v ®iline, p. 244.
    15. STANCEKOVA, D., SAPIETA, M., RUDAWSKA, A., NAPRSTKOVA, N., JANOTA, M. (2019) Production process intensification of a specific friction bearing by change of production technology and used material. In. METAL 2019 - Conference Proceedings of the 25 International Conference on Metallurgy and Mate-rials. Ostrava: TANGER, 826-831. ‏ Go to original source...
    16. KRZIKALLA, D., SLÍVA, A., MĚSÍČEK, J., PETRŮ, J. (2020) On modelling of simulation model for racing car frame torsional stiffness analysis. Alexandria Engineering Journal, 59(6), 5123-5133. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content