Manufacturing Technology 2021, 21(4):529-538 | DOI: 10.21062/mft.2021.062

Analysis of the Wear on Machined Groove Profiles Using Reverse Engineering Technology

Josef Sedlak ORCID...1, Denisa Hrusecka ORCID...1, Felicita Chromjakova ORCID...1, Jozef Majerik ORCID...2, Igor Barenyi ORCID...2
1 Tomas Bata University in Zlín, Faculty of Management and Economics, Department of Industrial Engineering and Information Systems, Mostní 5139, Zlín 760 01, Czech Republic
2 Department of Engineering, Faculty of Special Technology, Alexander Dubcek University of Trencin, Ku Kyselke 469, Trenčín 911 06, Slovak Republic

One of the key components in making Industry 4.0 a reality includes machines that are able to produce required products and components faster, more precisely and more flexibly than ever before based on so-called reverse engineering technology. Reverse engineering is a technology that enables rapid acquisition of data for CAD, CAM, CAE, thereby greatly shortening the development, design and fabrication of parts. In general, analogue data is converted to digital data, which is further processed. The paper deals with the analysis of prototype models of disc milling cutters with different blade profiles. The inspection of the shape of the disc-type prototypes is based on the reading of the digitized reference CAD model (workpiece with machined grooves), the subsequent positioning of the digitized protrusions of the disc mill cutters (milling cutter with edge profile 1, a milling cutter with edge profile 8) with respect to this reference CAD model, creating a colour map of the deviations at the selected points. The aim of the paper was to analyse the resulting wear (deviation of the dimensions at selected points) on the prototype of the disc milling cutters with the profiles of blades 1 and 8, which was simplified on the workpiece with the machined profiles of the grooves 1 to 4.

Keywords: disc milling cutter, workpiece with machined grooves, digitization, part inspection, wear, 3D scanner, reverse engineering, technology
Grants and funding:

Support under the project: Advancement and support of R&D for “Centre for diagnostics and quality testing of materials“ in the domains of the RIS3 SK specialization, ITMS2014+:313011W442, based on the Operational Programme Integrated Infrastructure and funded from the European Regional Development Fund.

Received: January 25, 2021; Revised: June 15, 2021; Accepted: June 22, 2021; Prepublished online: July 4, 2021; Published: September 18, 2021  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Sedlak J, Hrusecka D, Chromjakova F, Majerik J, Barenyi I. Analysis of the Wear on Machined Groove Profiles Using Reverse Engineering Technology. Manufacturing Technology. 2021;21(4):529-538. doi: 10.21062/mft.2021.062.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. SEDLÁK, J., POLZER, A., CHLADIL, J., SLANÝ, M., JAROŠ, A. (2017). Reverse Engineering Method Used for Inspection of Stirrer´ s Gearbox Cabinet Prototype. In: MM Science Journal, Vol. 17, No. 4, pp. 1877-1882. ISSN 1803-1269. Go to original source...
    2. SEDLÁK, J., POLZER, A., CHLADIL, J., SLANÝ, M., JAROŠ, A. (2017). Shape Inspection of Gear Prototypes Using Reverse Engineering Method. In: Manufacturing Technology, Vol. 17, No. 6, pp. 945-952. ISSN 1213-2489. Go to original source...
    3. PÍŠKA, M. et al. (2009). Speciální technologie obrábění. CERM, Brno. 1st ed. ISBN 978-80-214-4025-8.
    4. NAVRÁTIL, R. (2000). Reverse Engineering v praxi. [online]. Červen 2000 [cit. 2017-02-20]. Dostupné z: http://robo.hyperlink.cz
    5. SEDLÁK, J. (2008). Moderní technologie reverzního inženýrství - využití 3D skenerů. In: Technik, Vol. 16, No. 3, pp. 38-39. ISSN 1210-616X.
    6. SEDLÁK, J. (2008). Technologie výroby prototypů s podporou reverzního inženýrství a CAD/CAM: Disertační práce. Brno: Vysoké učení technické v Brně, Fakulta strojního inženýrství, Ústav strojírenské technologie, 104 s., 11 příloh. Vedoucí disertační práce doc. Ing. Miroslav PÍŠKA, CSc.
    7. ZOUHAR, J., PÍŠA, Z., SEDLÁK, J., SEDLÁČEK, J. (2007). Produktivní obrábění s využitím metod reverzního inženýrství. In: Sborník odborné konference "Frézování IV". Brno: VUT-FSI, Ústav strojírenské tech-nologie ve spolupráci s PRAMET TOOLS, s.r.o. Šumperk a ZPS Frézovací nástroje, a.s., Zlín, 31.1.2007, s. 189-196. ISBN 80-214-3239-X.
    8. RAJA, V., FERNANDES, K. J. (2008). Reverse engineering: an industrial perspective. Springer, London. ISBN 978-1-84628-855-5. Go to original source...
    9. SEDLAK, J., PROCHAZKOVA, J. (2007). Direct B- Spline Interpolation of CNC Tool Trace From Cloadpoints. In: Manufacturing Technology, Vol. 7, No. 1, pp. 66-71. ISSN 1213-2489.
    10. SEDLÁK, J., PROCHÁZKOVA, J. (2007). Direct B- Spline Interpolation of CNC Tool Trace From Cloadpoints. In: Strojírenská technologie, Vol. 12, No. 2, pp. 24-28. ISSN 1211-4162.
    11. STYLIANOU, G., FARIN, G. (2003). Crest lines extraction from 3D triangulated meshes. In: Hierarchical and geometrical methods in scientific visualization, pp. 69-81. ISBN 978-3-642-55787-3.
    12. WEBER, CH., HAHMANN, S., HAGEN, H. (2010). Methods for feature detection in point cloud. In: Visualization of Large and Unstructured Data Sets- IRTG Workshop, pp. 90-99. Go to original source...
    13. PIERACCINI, M., GUIDI, G., ATZENI, C. (2001). 3D digitizing of cultural heritage. In: Journal of Cultural Heritage 2, Vol. 1, pp. 63-70. [online]. [seen 2017-03-12]. Available at: http://www.sciencedirect.com/science/article/pii/S1296207401011086 Go to original source...
    14. 3D měření. (2009). MAPV 2009. [online]. [cit. 2017-02-20]. Dostupné z: http://www.uamt.feec.vutbr.cz/vision/TEACHING/MAPV/08%20-%203D%20mereni.pdf
    15. 3D Imaging with NI LabVIEW. (2012). National Instruments. [online]. [seen 2017-03-15]. Available at: http://www.ni.com/white-paper/14103/en
    16. MCAE SYSTEMS, s.r.o., Kuřim, ČR. 3D měření, inspekce a skenování. [online]. [cit. 2017-04-05]. Dostupné z: http://www.mcae.cz/cs/sluzby/3d-mereni-inspekce-a-skenovani/
    17. GOM GmbH, Schmitzstraße, Germany. Precise Industrial 3D Metrology. [online]. [seen 2017-03-07]. Available at: http://www.gom.com/3d-software/gom-inspect.html
    18. SADÍLEK, M., ČEP, R., SADÍLKOVÁ, Z., VALÍČEK, J., PETŘKOVSKÁ, L. (2013). Increasing Tool Life During Turning with a Variable Depth of Cut. In: Materiali in Technologije, Vol. 47, No. 2, pp. 199-203. ISSN 1580-2949. UDK 621.941:004.896.
    19. ČEP, R., JANÁSEK, A., MARTINICKÝ, B., SADÍLEK, M. (2011). Cutting Tool Life Tests of Ceramic Inserts for Car Engine Sleeves. In: Tehnički Vjestnik, Vol. 18, No. 2, pp. 203-209. ISSN 1330-3651. UDC/UDK 621.9.025:620.169.1.
    20. DUBOVSKÁ, R., MAJERÍK, J., ČEP, R., KOUŘIL, K. (2016). Investigating the influence of cutting speed on the tool life of a cutting insert while cutting DIN 1.4301 steel. In: Materiali in Tehnologije, Vol. 50, No. 3, pp. 439-445. ISSN 1580-2949. Go to original source...
    21. MAJERÍK, J., DUBOVSKÁ, R., JAMBOR, J., ČEP, R., KRATOCHVÍL, J., KOUŘIL, K. (2018). Experi-mental Investigation into Wear and Tool Life of Milling Cutter PVD Coated Carbide Inserts While Armox 500 Steel Hard Milling. In: Tehnički Vjestnik, Vol. 18, No. 6, pp. 1603-1610. ISSN 1330-3651.
    22. POKORNÝ, Z., BARBORÁK, O., HRUBÝ, V. (2012). Characteristics of Plasma nitride layers in deep Holes. In: Kovové Materiály, Vol. 50, No. 3, pp. 209-212. ISSN 0023-432X. Go to original source...
    23. POKORNÝ, Z., DOBROCKÝ, D., KADLEC, J., STUDENÝ, Z. (2018). Influence of alloying elements on gas nitriding process of high-stressed machine parts of weapons. In: Kovové Materiály, Vol. 56, No. 2, pp. 97-103. ISSN 0023-432X. Go to original source...
    24. SEDLÁK, J., VANĚK, R., CHLADIL, J. (2018). Production of Assistance Brake for Mechanical Wheel-chair. In: Manufacturing Technology, Vol. 18, No. 3, pp. 487-492. ISSN 1213-2489. Go to original source...
    25. SEDLÁK, J., KUDLÁČOVÁ, B., ZEMČÍK, O., JAROŠ, A., SLANÝ, M. (2017). Production of Planetary Mechanism Model Prototype using Additive Method of Rapid Prototyping. In: Manufacturing Technology, Vol. 2017, No. 3, pp. 374-381. ISSN 1213-2489. Go to original source...
    26. FRVŠ. (2013). Financovaný projekt 1393/2013 - A/a, Prostorový skener pro výuku reverzního inženýrství. Hlavní řešitel: prof. Ing. Václav Píštěk, DrSc.
    27. Inspekce tvaru součásti. [online]. [cit. 2017-02-15]. Dostupné z: http://www.iae.fme.vutbr.cz/userfiles/ramik/files/Studium/Podklady%20ke%20studiu/3D%20skenov%C3%A1n%C3%AD/E-learning-Inspekce%20tvaru%20soucasti.pdf
    28. PAPROCKI, M., WYGODA, M., WYCZESANY, P., BAZAN, P. (2021). Symptoms of Wear HSS Cutting Tools in Different Wear Stages. In: Manufacturing Technology, Vol. 21, No. 3, pp. 387-397. ISSN 1213-2489. Go to original source...
    29. MAJERIK, J., BARENYI, I. (2018). Wear and Tool Life Investigation of Carbide Inserts while Hard Ma-chining of Armox 500 Steel. In: Manufacturing Technology, Vol. 18, No. 2, pp. 273-278. ISSN 1213-2489. Go to original source...
    30. POPOV, A., BABAK, S. (2018) Effect of Cutting Modes and Tool Wear on the Microhardness of the Sur-face Layer after Face Milling of Structural and Stainless Steels. In: Manufacturing Technology, Vol. 18, No. 6, pp. 1011-1014. ISSN 1213-2489. Go to original source...
    31. SEDLÁK, J., POLZER, A., SLIWKOVÁ, P. (2016). Digitalizace prototypů ozubených kol pomocí optického skeneru ATOS Compact Scan 2M, pp. 1-24. VUT, Brno.

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content