Manufacturing Technology 2019, 19(3):409-413 | DOI: 10.21062/ujep/305.2019/a/1213-2489/MT/19/3/409

Design and Determination of Strength of Adhesive Bonded Joints

Tomáš Kalina, František Sedláček
Department of Machine Design, Faculty of Mechanical Engineering, University of West Bohemia, 306 14 Pilsen. Czech Republic

The paper deals with methodology of prediction of adhesive bonded joints strength. Problematics of adhesive bonded joints is a very complex task. There are several different (different precision and different complexity) mathematical models of adhesive bonded joints, which attempts to describe the real behavior of adhesive and adhesive bonded joints during load as accurately as possible. This article presents a comprehensive overview of what to take into account and how to proceed with designing/controlling the strength of adhesive bonded joints. Mathematical models are supplemented by material data from experimental tests. The proposed methodology takes into account both adhesive and cohesive properties (material of bonded parts, surface treatment of bonded material, type of adhesive, thickness of adhesive, bonding technology, loading modes etc.). Methodology "how to proceed" is described in detail and is complemented with a flowchart.

Keywords: Adhesive Bond, Cohesive parameters, Epoxy Adhesive, Methodology, Surface treatment
Grants and funding:

Project SGS2019-001 (The complex support of designing of technical equipment IV).

Published: June 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Kalina T, Sedláček F. Design and Determination of Strength of Adhesive Bonded Joints. Manufacturing Technology. 2019;19(3):409-413. doi: 10.21062/ujep/305.2019/a/1213-2489/MT/19/3/409.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. KALINA, T.; SEDLACEK, F.; KRYSTEK, J. (2018). Determination of the influence of adherent surface on the adhesive bond strength. MATEC Web of Conferences, Vol.157, 14 March 2018, Article number 05012, ISSN: 2261236X, DOI: 10.1051/matecconf/201815705012 Go to original source...
    2. KALINA, T.; SEDLACEK, F.; KROUPA T. (2018). Determination of cohesive parameters for mode I of epoxy adhesive. Proceedings of the 29th DAAAM International Symposium, pp.0746-0751, B. Katalinic (Ed.), Published by DAAAM International, ISBN 978-3-902734-20-4, ISSN 1726-9679, Vienna, Austria, DOI:10.2507/29th.daaam.proceedings.108 Go to original source...
    3. KALINA T. (2017) Designing of bonded joints composite materials, Diploma thesis, Department of Machine Design, University of West Bohemia, Pilsen, Czech Republic
    4. KALINA, T.; HELLER, P.; CHVAL, Z.; SEDLÁČEK, F.; KŘÍŽEK M.; BARTOŇ L. (2018) Numerical Simulation and Experimental Testing of Two-axle Chassis of Low-floor Trams. Manufacturing Technology, pp.248-254, Vol.18, No.2. UJEP, 2018, ISSN: 1213-2489. Go to original source...
    5. ŠPIRK S. (2017). The Collision of Unbelted Passenger with Assessment of Various Vehicle Interior, In: Manufacturing technology: journal for science, research and production. - ISSN 1213-2489. - Vol. 17, No. 6 (2017), pp. 962-969, No. of acticle: M2017187. Go to original source...
    6. RAZ, K., HORA, J., PAVLATA, P. (2017) Unconventional Materials Usage in Design of Vehicle Bodies In: Manufacturing technology: journal for science, research and production. - ISSN 1213-2489. - Vol. 17, No. 5 (2017), pp. 823-827, No. of acticle: MT2017150. Go to original source...
    7. JENICEK, S., VRATISLAV, K., KALINA, T., MASEK, B. (2016) Use of waterjet in manufacturing test bars of high-strength steels, In: Annals of DAAAM and Proceedings of the International DAAAM Symposium, 27 (1), pp. 219-224. doi: 10.2507/27th.daaam.proceedings.032 Go to original source...
    8. MARKOVICOVA, L., HURTALOVA, L., ZATKALIKOVA, V., GARBACZ, T. (2014). Evaluation of composite structures by light microscopy and image analysis, Manufacturing Technology, ISSN:1213-2489, 14 (3), pp. 351-355. Go to original source...
    9. MARKOVICOVA, L., ZATKALIKOVA, V. (2016). Composite Materials Based on pa Reinforced Glass, Fibers, In: Materials Today: Proceedings, Vol. 3, pp. 1056-1059, E-ISSN:2214-7853 Go to original source...
    10. CHUNG & DEBORAH, D. L. (2003) Composite materials: functional materials for modern technologies. London: Springer. 289 pp. ISBN 185233665x
    11. SKOVAJSA, M. & SEDLACEK, F. (2017) Numerical simulation of delamination in laminated composite plates using cohesive elements, 27TH DAAAM International symposium DOI:10.2507. Go to original source...
    12. Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites, Designation: D 5528-01 (Reapproved 2007)
    13. Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites, Designation: D7905/D7905M
    14. Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic Bonding, Designation: D5868-01
    15. Collective of authors, Loctite - Worlwide Design Handbook. Mainz: Erasmusdruck GmbH. 452. ISBN 0-9645590-0-5 (1998)

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content