Manufacturing Technology 2018, 18(5):856-860 | DOI: 10.21062/ujep/190.2018/a/1213-2489/MT/18/5/856

Technological Parameters and PMMA Surface Structure

Libuše Sýkorová, Jana Knedlová, Vladimír Pata, Milena Kubišová
Faculty of Technology, Tomas Bata University in Zlin. Vavrečkova 275, 760 01 Zlín, Czech Republic

The paper focuses on the issue of microprocessing of polymer materials by laser. Specifically, the task is solved by changing the technological parameters, namely the cutting speed, the power and a change of DPI and their impact on the resulting surface quality and depth of cut. During machining, the input technological parameters were changed and followed by evaluation of their interaction with the concentrated radiant energy of the laser beam PMMA, as and representative of the amorphous polymers, was selected for experimental machining. It is one of the best machinable polymer materials regarding this unconventional technology, and it is also frequently applied in industrial practice.

Keywords: Laser beam, Laser Mode, Technological Parameters. Amorphous Polymers

Published: October 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Sýkorová L, Knedlová J, Pata V, Kubišová M. Technological Parameters and PMMA Surface Structure. Manufacturing Technology. 2018;18(5):856-860. doi: 10.21062/ujep/190.2018/a/1213-2489/MT/18/5/856.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. MAŇKOVÁ. I.: (2000). Progresívné technologie. pp. 167 - 223. Vienala Košice.
    2. ZRAK. A. MEŠKO. J. SLÁDEK. A.. VICEN. M. (2016). Evaluation of Properties from the Cutting Surface after Applying Laser Beam Technology Using Different Scales of Cutting Speed. In: Manufacturing Technology. Vol. 16. No. 6. pp. 1404 - 1408. UJEP. Czech Republic. Go to original source...
    3. NIGROVIČ. R.. MEŠKO. J.. ZRAK. A. (2016). The influence of Laser Beam on the Surface Integrity of Cutting Edge. In: Manufacturing Technology. Vol. 16. No. 6. pp. 1332 - 1336. UJEP. Czech Republic. Go to original source...
    4. VAJDOVÁ. A.. MIČETOVÁ. A.. NESLUŠAN. M.. KOLAŘÍK. K. (2014). Analysis of Surface Integrity of Parts after Non-conventional Methods of Machining. In: Manufacturing Technology. Vol. 14. No. 3. pp. 470 - 474. UJEP. Czech Republic. Go to original source...
    5. Radovanovič. R. (2004). Mathematical Model for Severance Energy by CO2 Laser Cutting of Mild Steel. In: Manufacturing Technology. Vol. 9. No. 3. pp. 20 - 26. UJEP. Czech Republic.
    6. Felho. C. Kundrák. J. (2014). Characterization of Topography of Cut Surface Based on Theoretical Roughness. In: Key Engineering Materials. Vol. 581. pp. 470 - 474. UJEP. Switzerland.
    7. JINFENG ZHANG, CHAO FENG, YUNHUI MA, WEI TANG, SHUAI WANG, XIN ZHONG. Non-destructive analysis of surface integrity in turning and grinding operations (2017) Manufacturing Technology, 17/3, pp. 412-418.
    8. HANZL P., ZETKOVÁ I., MACH J. Optimization of the Pressure Porous Sample and Its Manufacturability by Selective Laser Melting (2017) Manufacturing Technology, 17/1, pp. 34-38. Go to original source...
    9. E. HNATKOVA, D. SANETRNIK, V. PATA, B. HAUSNEROVA, ZDENEK DVORAK. Mold Surface Analysis after Injection Molding of Highly Filled Polymeric Compounds. (2016) Manufacturing Technology, 16/1, pp. 86-90. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content