Manufacturing Technology 2017, 17(3):369-374 | DOI: 10.21062/ujep/x.2017/a/1213-2489/MT/17/3/369

Application of Brakes on Cranes in River Ports

Danka Rakúsová, Ivan Kopecký, Peter Lipták
Faculty of Special Technology, Trencin University of A. Dubcek in Trencin, Pri parku 19, 911 06 Trencin, Slovak Republic

In the last decades, advanced brake technology in the port sector follows the global productivity developments of the international maritime trade. Container vessels are getting bigger and bigger and the ship to shore cranes is getting consistently higher. But service, emergency or storm brakes cannot be getting bigger and bigger to meet these increasing demands. Throughout history, innovations and advancements in technology have made industry better through automation and increased efficiency. No matter how advanced industry becomes, the need for emergency duty stopping brakes will not go out of style because there are always circumstances that require mechanical brakes to do the job. Brakes will invariably insure against those rare, yet potentially catastrophic events that even modern technology cannot defend against.

Keywords: brakes, disc, regulated braking, emergency brake, braking torque

Published: June 1, 2017  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Rakúsová D, Kopecký I, Lipták P. Application of Brakes on Cranes in River Ports. Manufacturing Technology. 2017;17(3):369-374. doi: 10.21062/ujep/x.2017/a/1213-2489/MT/17/3/369.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. LIPTAK, P., KOPECKY, I., GALETA, A. (2005). Špeciálna technika, časť Stroje a zariadenia, Trenčín, 2005, ISBN 80-8075-053-X
    2. KOPECKY, I., RAKUSOVA, D. (2014). Hybridné fotovoltické zariadenia v urbanizovaných prostrediach, Transfer 2014 15. medzinárodná vedecká konferencia, Trenčín, 23. - 24. október 2014
    3. STN 010606 - 80 Spoľahlivosť v technike.
    4. RAKUSOVA, D. (2015). Need for mechanical protection of Gabcikovo ship lock, 2015. In: Recent advances on mechanics, materials, mechanical engineering and chemical engineering: Proceedings of the international conference on mechanics, materials, mechanical engineering and chemical engineering Barcelona, Spain. - Sofia : Institute for Natural Sciences and Engineering, 2015. - ISBN 978-1-61804-295-8. - p.88-97.
    5. CHUKAVINA, A.A., ALIEV V.V, RAKUSOVA D, (2014). Modelling of kinetic reaction in combustion of organic fuel, 155-160 p, In: International conference in military technology proceeding ICMT'14, ISBN 978-80-8075-639-0 EAN 9788080756390
    6. RAKUSOVA, D., LIPTAK, P. (2015). Operation of Danube ports supported by specialized equipment, 2015.In: Deterioration, Dependability, Diagnostics: Monograph. - Brno: University of Defence, 2015. - ISBN 978-80-7231-431-7. - p. 265-270.
    7. KOPECKY, I., RAKUSOVA, PILKOVA, M. (2014). Hybrid photovoltaic equipment in urban areas, 2014. - In: University review. - ISSN 1339-5017. - Vol.8, No.3-4(2014), p.81-86
    8. LIPTAK, P., STODOLA, J., RAKUSOVA, D. (2014). Methodology of risk analysis: In: University review. - ISSN 1339-5017. - Vol.8, No.3-4(2014), p.90-93.ty review. - ISSN 1339-5017. - Vol.8, No.3-4(2014), p. 90-93.
    9. LYSAK, A., RAKUSOVA, D. (2013). Rotating machinry vibration signs and influence factors, 2013.In: Deterioration, dependability, diagnostics: Monograph. - Brno: University of Defence, 2013. - ISBN 978-80-7231-939-8.-p. 299-306.
    10. [15.9.2016], http://www.seatrax.com/cranebasics.html
    11. [15.9.2016], http://www.jbeq.com/single-post/2015/8/13/Why-Include-a-Mechanical-Load-Brake-in-Your-Hoist-Specification
    12. BLATNICKÝ, M. (2015). Checks Crane Hooks, Manufacturing Technology, November 2015, Vol. 15, No. 5., ISSN 1213-2489, pp766 - 771. Go to original source...
    13. PILCH O., SNAHNICAN, F., HRUBY,V., STUDENY Z. (2015). The Effect of Plasma Nitriding Parameters on the Thickness of Nitrided Layers, Manufacturing Technology, November 2015, Vol. 15, No. 5, ISSN 1213-2489, pp. 885 - 889 Go to original source...
    14. LEGUTKO, S., KROLCZYK, G., KROLCZYK, J. (2014). Quality Evaluation of Surface Layer in Highly Accurate Manufacturing, Manufacturing Technology, March 2014, Vol. 14, No. 1 ISSN 1213-2489, pp. 50 - 56 Go to original source...

    Return to the content