Manufacturing Technology 2016, 16(6):1269-1274 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/6/1269

Simulation of Spinneret Micro-hole Spade Drill Drilling Based on DEFORM-3D

Zhang Chunyan1,2, Yang Chongchang2, Zhang Ronggen2
1 Shanghai University of Engineering Science, 333 Longteng Road, Shanghai 201620, China
2 Donghua University, 1882 Yan'an Road West, Shanghai, China, 200051

An emulation study of the drilling by the spade drill on the spinneret micro-hole is conducted by using FEM analysis software Deform-3D. According to application of finite element software Deform-3D, some characteristic parameter of the work piece and the cutting tool material are set. The distributed situation of cutting force, cutting temperature and tool wear in different cutting parameters are simulated analysis. By discussing the location of the spade drill drilling wear, further optimization of parameters cutting and tool for the spinneret micro-hole drilling provide the better basis.

Keywords: Deform-3D, Spade Drill, Spinneret Micro-hole, Cutting force, cutting temperature, Tool wear

Published: December 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Chunyan Z, Chongchang Y, Ronggen Z. Simulation of Spinneret Micro-hole Spade Drill Drilling Based on DEFORM-3D. Manufacturing Technology. 2016;16(6):1269-1274. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/6/1269.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. WANG, Y., SHI, C., CUI, Z. (2006). Design of spinneret [J]. Polyester Industry, 2006, 19(3):27-30.
    2. PENG, H., YUAN, F. (2010). Experiments and analysis of the near-dry deep hole drilling system [J]. Modern manufacturing engineering, 2010(04):79-81
    3. ZHANG, Z., ZHANG, J., WANG, L. (2011). FEA of Cutting Force of Stainless Steel Based on DEFORM-3D [J]. Light Industry Machinery, 2011, 29(4):40-42
    4. PUJANA, J., RIVERO, A., CELAYA, A., et al. (2009). Analysis of ultrasonic-assisted drilling of Ti6A14V [J] International Journal of Machine Tools& Manufacture, 2009 (49). Go to original source...
    5. YANG, J., ZHOU, L., WU, N. (2007). Simulation of Drilling Force Based on Software Deform 3D [J]. Tool Engineering. 2007, 41(04)50-53
    6. GUO, L., YANG, CH., DAI, H, et al. (2008). Machining Technology of Large Lenth-diameter Ratio Pilot Micro-hole of Spinneret. Tool Engineering. 2008,42(01)97-99
    7. GAO, B. (2013). Research on Spinneret of Bottom Hole Automatic Processing. [D] Dong hua University, 2013
    8. YANG, CH. (2008). Studies on Design, Manufacture and Applications of Spinneret for Melt-spinning Shaped Fibers. [D]. Dong hua University, 2008
    9. YING, Z., ZHOU, L., WANG, J., LIU, L. (2011). FEM Dynamic Simulation of Drill with Indexable Inserts. [J] Tool Engineering. 2011(10):20-23.
    10. LI, CH., WANG, X., YAN, H. (2006). DEFORM5.03 Metal Forming Finite Element Analysis. [M].Beijing, CHINA MACHINE PRESS, 2006
    11. GAO, X., LI, P., YAN, P., ZOU, P. (2011). Simulation of Stainless Steel Drilling Mechanism Based on Deform-3D [J]. Tool Engineering. 2011(4):17-20.
    12. KYNCL, L., SADÍLEK, M., ČEP, R., PETRŮ, J., STANCEKOVA, D., PROCHÁZKA, P., NOVÁČEK, P. (2015). Tests of Drills during Drilling Holes into Alloy Wheels [J]. Manufacturing Technology. 2015,14(4): 554-556 Go to original source...
    13. MAŇKOVÁ, I., VRABEĽ, M., BEŇO, J., KOVAC, P., GOSTIMIROVIC, M. (2013). Application of Taguchi Method and Surface Response Methodology to Evaluate Of Mathematical Models to Chip Deformation when Drilling With Coated and Uncoated Twist Drills. [J]. Manufacturing Technology. 2013, 13(4): 492-499 Go to original source...
    14. MENG, L. N., WANG, A. H., WU, YU, WANG, XI; XIA, H.B.; WANG, Y.N. (2015). Blind micro-hole array Ti6Al4V templates for carrying biomaterials fabricated by fiber laser drilling [J].Journal of Materials Processing Technology, 2015, 222: 335-343. Go to original source...
    15. FURUTANI, KATSUSHI. HIRAOKA, DAISUKE. (2014). Condition monitoring in concurrent micro-hole electrical discharge machining with electrode feeding devices employing AZARASHI (Seal) mechanism Procedia CIRP, 2014,14: 424-429 Go to original source...
    16. ADELMANN, B, HELLMANN, R. (2015). Rapid micro hole laser drilling in ceramic substrates using single mode fiber laser [J]. Journal of Materials Processing Technology, 2015, 221 : 80-86 Go to original source...
    17. DAS, AK, SAHA, P. (2015). Experimental investigation on micro-electrochemical sinking operation for fabrication of micro-holes [J].Journal of the Brazilian of society of mechanical sciences and engineering, 2015,37:657-663 Go to original source...
    18. PATWA, R., HERFURTH, H., BRATT, C., Laser drilling of micro-hole arrays in tantalum [J]. Journal of laser applications, 2015,27(2) Go to original source...
    19. HA, K.H., LEE, S.W., KIM, J., JEE, W.Y., CHU, C.N. (2015).Fabrication of a micro-hole array on metal foil by nanosecond pulsed laser beam machining using a cover plate [J].Journal of micromechanics and microengineering, 2015, 25:2 Go to original source...
    20. VAZQUEZ, E., GOMAR, J., CIURANA, J., RODRIGUEZ, C.A. (2015). Evaluation of machine-tool motion accuracy using a CNC machining center in micro-milling processes[J]. International journal of advanced manufacturing technology, 2015,76:219-228 Go to original source...
    21. RAHAMATHULLAH, I., SHUNMUGAM, M.S. (2015). Mechanistic approach for prediction of forces in microdrilling of plain and glass-reinforced epoxy sheets[J].2015, 75(5): 1177-1187 Go to original source...

    Return to the content