Manufacturing Technology 2014, 14(3):371-375 | DOI: 10.21062/ujep/x.2014/a/1213-2489/MT/14/3/371

Setting of Causes of Adhesive Bonds Destruction by Means of Optical Analysis

Miroslav Müller
Faculty of Engineering, Czech University of Life Sciences Prague. Czech Republic

A research analyses an influence of an adhesive surface treatment on an adhesive bond strength. Constructional adhesives used for bonding in an automotive industry were used for the research. A significant factor for evaluating the adhesive bond failure is the research of bonded areas by means of an optical analysis. An even layer of the adhesive in the bond is connected with it. The adhesive bonds diagnostics is difficult. It is necessary to control a quality of the production at the production process. A significant factor lowering the resultant strength of the adhesive bond is its creation. One of possibilities of the adhesive bond diagnostics is to use a method of an optical analysis. An uneven layer of the adhesive belongs among main causes of a failure / considerable decrease of the strength of the adhesive bond.

Keywords: Adhesive layer, Diagnostic, Failure area, One-component epoxy, testing

Published: October 1, 2014  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Müller M. Setting of Causes of Adhesive Bonds Destruction by Means of Optical Analysis. Manufacturing Technology. 2014;14(3):371-375. doi: 10.21062/ujep/x.2014/a/1213-2489/MT/14/3/371.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. MÜLLER, M., CHOTÌBORSKİ, R., KRMELA, J. (2007). Technological and constructional aspects affecting bonded joints. In: Research in Agricultural Engineering, Vol. 53, pp. 67-74. Go to original source...
    2. MÜLLER, M., VALÁ©EK, P. (2013). Assessment of bonding quality for several commercially available adhesives. In: Agronomy Research, Vol. 11, No. 1, pp. 155-162.
    3. CIDLINA, J., MÜLLER, M., VALÁ©EK, P. (2014). Evaluation of Adhesive Bond Strength Depending on Degradation Type and Time. In: Manufacturing Technology, Vol. 14, No. 1, pp. 8-12. Go to original source...
    4. NOVÁK, M. (2012). Surfaces with high precision of roughness after grinding. In: Manufacturing technology, Vol. 12, pp. 66-70. Go to original source...
    5. NOVÁK, M. (2011). Surface quality of hardened steels after grinding. In: Manufacturing technology, Vol. 11, pp.55-59. Go to original source...
    6. HOLE©OVSKİ, F., NÁPRSTKOVÁ, N., NOVÁK, M. (2012). GICS for grinding process optimization. In: Manufacturing technology, Vol. 12, pp. 22-26. Go to original source...
    7. MESSLER, R. W. (2004). Joining of materials and structures from pragmatic process to enabling technology. Burlington: Elsevier, 790 p. Go to original source...
    8. MÜLLER, M. (2013). Research of renovation possibility of machine tools damage by adhesive bonding technology. In: Manufacturing Technology, Vol. 13, pp. 504-509. Go to original source...
    9. MÜLLER, M. (2014). Influence of adhesives storing temperature on adhesive bond strength. In: Manufacturing Technology, Vol. 14, pp. 71-75. Go to original source...
    10. MÜLLER, M. (2013). Research of Liquid Contaminants Influence on Adhesive Bond Strength Applied in Agricultural Machine Construction. In: Agronomy Research, Vol.11, pp. 147-154.
    11. MÜLLER, M. (2011). Influence of Surface Integrity on Bonding Process. In: Research in Agricultural Engineering, Vol. 57, pp. 153-162. Go to original source...
    12. RUDAWSKA, A. (2014). Selected aspects of the effect of mechanical treatment on surface roughness and adhesive joint strength of steel sheets. In: International Journal of Adhesion and Adhesives, Vol. 50, pp. 235-243. Go to original source...
    13. NAITO, K., ONTA, M., KOGO, Y. (2012). The Effect of Adhesive Thickness on Tensile and Shear Strength of Polyimide Adhesive. In: International Journal of Adhesion & Adhesives, Vol. 36, pp. 77-85. Go to original source...
    14. COMYN, J. (1990). Surface treatment and analysis for adhesive bonding. In: International Journal of Adhesion & Adhesives, Vol. 10, p. 161-165. Go to original source...
    15. KOTOUSOV, A. (2007). Effect of a thin plastic adhesive layer on the stress singularities in a bi-material wedge. In: International Journal of Adhesion & Adhesives, Vol. 27, No. 8, pp. 647-652. Go to original source...
    16. GRANT, L. D. R. et al., (2009). Experimental and numerical analysis of single-lap joints for the automotive industry. In: International Journal of Adhesion & Adhesives, Vol. 29, No. 4, pp. 405-413. Go to original source...
    17. OLIA, M., ROSSETTOS, J. N., (1996). Analysis of adhesively bonded joints with gaps subjected to bending. In: International Journal of Solids and Structures, Vol. 33, No. 18, pp. 2681-2693. Go to original source...

    Return to the content