Manufacturing Technology 2014, 14(1):91-97 | DOI: 10.21062/ujep/x.2014/a/1213-2489/MT/14/1/91

Identification of Machinability of Ceramic Materials by Turning

Dana Stancekova1, Tomas Kurnava1, Michal Sajgalik1, Natasa Naprstkova2, Jozef Struharnansky1, Peter ©čotka1
1 University of Zilina, Faculty of Mechanical Engineering, Univerzitná 1, 010 26, Zilina, Slovak Republic
2 Faculty of Production Technology and Management, JEPU in Ústí nad Labem, Czech Republic

Paper deals with the machining of super-hard ceramics by turning. The introductory part deals with analysis of used ceramic materials and their use in technical practice. Since it is a very hard technical ceramics and particularly resistant material, at present, is increasingly used to produce components that ensure long life and particularly high resistance, even in aggressive environments where metal materials can no longer be used. Products from ceramics are pressed and sintered directly to the desired shape, but in some cases they have to be machined, which technically can cause a problem. The aim of the experimental part is selection of suitable cutting insert, determining of cutting conditions that would ensure the productive machining of given ceramics. Work may serves as a troubleshooting support for machining ceramics.

Keywords: Industrial ceramics, diamond cutting disc, super-hard materials

Published: March 1, 2014  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Stancekova D, Kurnava T, Sajgalik M, Naprstkova N, Struharnansky J, ©čotka P. Identification of Machinability of Ceramic Materials by Turning. Manufacturing Technology. 2014;14(1):91-97. doi: 10.21062/ujep/x.2014/a/1213-2489/MT/14/1/91.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. CEP, R., KOURIL, K., MRKVICA, I., JANASEK, I., PROCHAZKA, J. (2010) Zkouąky nastroju Kyocera v podminkach prerusovaneho rezu. In. Strojirenska technologie, vol. XV, 2010/3, pp. 51-58
    2. CZAN, A., STEKLAC, D., STANCEKOVA, D. (2005). Tools for High Productive Machining of Bearing Materials By Turning. In Tools Zlin
    3. NOVÁKOVÁ, J., PETŘKOVSKÁ, L., BRYCHTA, J., STANČEKOVÁ, D. (2009). Influence of Cutting Parameters on Integrity Surface At High Speed Cuttin. In. Transactions of the V©B - Technical University of Ostrava. Mechanical Series, ročník LV., číslo 1/2009, Česká republika. Ostrava: V©B - TUO, pp. 203-209
    4. HOLESOVSKY F., NAPRSTKOVA N., NOVAK M. (2012). GICS for grinding process optimization. In Manufacturing Technology XII/12, UJEP: Ústi n. Labem. p. 22-26. Go to original source...
    5. http://www.matnet.sav.sk/index.php
    6. CZAN, A., TILLOVA, E., SEMCER, J., PILC, J. (2013) Surface and subsurface residual stresses after machining and their analysis by x-ray diffraction. In. Komunikacie, Volume 15, Issue 2, pp. 69-76 Go to original source...
    7. CZÁN, A., SAJGALÍK, M., HOLUBJAK, J., KOURIL, K. (2013): Studying of cutting zone when finishing titanium alloy by application of multifunction measuring syste, In. Manufacturing Technology, 2013, Vol. 13, No. 4, pp. 428-431 Go to original source...
    8. NÁPRSTKOVÁ, N., KUSMIERCZAK, S., CAIS, J. (2013): Influence of strontium in AlSi7Mg0.3 alloy on the tool wear, In. Manufacturing Technology, 2013, Vol. 13, No. 3, pp. 373-380 Go to original source...
    9. SAJGALIK, M., CZAN, A. (2011): Studying of processes in cutting zone by non-destructive methods, In Technological Engineering. volume 8, number 2
    10. KANDIL, F.A., LORD, J.D., FRY, A.T., GRANT, P.V. (2001) A Review of Residual Stress Measurement Methods-A Guide to Technique Selection, NPL Report MATC(A)04, pp. 25-32.
    11. PILC, J., VASILKO, K.(2013) Development and applications of a rotating turning tool. In Manufacturing Technology XIII/13. UJEP: Ústi n. Labem. p. 226-231. Go to original source...
    12. SCHULZE V. - AUTENRIETH H. - DEUCHERT M. - WEULE H. (2010). Investigation of surface near residual stress states after micro-cutting by finite element simulation. In. CIRP Annals - Manufacturing Technology 59, pp. 117-120 Go to original source...
    13. www.sjf.tuke.sk
    14. DANI©OVÁ, N., RU®AROVSKÝ, R., VELÍ©EK, K. (2011) Design alternatives of intelligent camera system for check parts at the intelligent manufacturing-assembly cell. In. ITMS 2011; Shanghai, Applied Mechanics and Materials, 7 Volume pp. 2262-2266 Go to original source...
    15. KAROLCZAK, P. - KOWALSKI, M. - WA¦CIŃSKA, H. (2011) Wpływ minimalnego smarowania na chropowato¶ć powierzchni po toczeniu materiałów kompo-zytowych o osnowie aluminium. In. Obróbka skrawaniem. Nauka a przemysł / pod red. Wita Grzesika. Opole, pp. 103-110
    16. HATALA M., CEP R., PANDILOV Z. (2010) Analysis of surface roughness and heat affected zone of surfaces of steel EN S355J0 after plasma arc cutting. In. Mechanical Engineering-Scientific Journal, University of Skopje, pp.1-6.
    17. LITVAJ, I., PONI©ČIAKOVÁ, O., STANČEKOVÁ, D., DRBÚL, M. (2013): Knowledge processes and their implementation in small transport companies, In: Transport means 2013 : proceedings of the 17th international konference, Kaunas University of Technology, Lithuania, pp. 153-156.

    Return to the content