Manufacturing Technology 2013, 13(2):226-231 | DOI: 10.21062/ujep/x.2013/a/1213-2489/MT/13/2/226

Development and applications of a rotating turning tool

Jozef Pilc1, Karol Vasilko2
1 University of Žilina, Faculty of Technological Engineering, 010 26 Žilina, Univerzitná 1, SR
2 Faculty of Manufacturing Technologies Technical University of Košice, 080 01 Prešov, Bayerova 1, SR

Technical literature presents numerous experiments with rotary turning tools application. Their advantages include extremely high durability, better quality of the machined surface as well as good chip shaping. Their wider industrial utilization was prevented due to the fact that a bearing is extremely dynamically stressed by a cutting force. Antifriction bearings have to big sizes and cause oscillation in the system, while sliding bearings manifested short durability and slackness inside. The authors of the paper tried to solve the mentioned problem by the application of an adjustable tapered roller bearing, ensuring a stable machining process. The paper contains the design as well as the results of the experimental verification obtained by the application of this improved tool.

Keywords: machined surface, durability, chip shaping, roller bearing

Published: June 1, 2013  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Pilc J, Vasilko K. Development and applications of a rotating turning tool. Manufacturing Technology. 2013;13(2):226-231. doi: 10.21062/ujep/x.2013/a/1213-2489/MT/13/2/226.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. CHEN, P.: High-Performance Machining of SiC Whisker-Reinforced Aluminium Composits by Self-Propelled Rotary Tools. Annals of the CIRP Vol.41/1/1992, p. 59-6ľ Go to original source...
    2. SHAW, M. S., SMITH, P., COOK, N.: The rotary cutting tool. Trans. of ASME, Vol. 74, p. 1065-1076 Go to original source...
    3. VENUVINOD, Pk., REDDY, P. N.: Some Studies on Cutting with Self Propelled Rotary Tools. ASME, 81-WA/Prod-16
    4. BOBROV, V. F., JERISALIMSIJ, D, E.: Kinematika rezanij čašečnymi rezcami. Vestnik mašinostrojenija, Nr. 6, 1969, s. 17-19
    5. VASILKO, K., MÁDL, J.: Teorie obrábění 2. díl. Univerzita J.E.Purkyně, Ústí nad Labem: 2012, 526 s., ISBN 978-80-7414-460-8
    6. VASILKO, K., PILC, J.: Klzné uloženie rotujúceho sústružníckeho noža. Patent SR č. 211 831, 21.3.1980
    7. LOCJANSKIJ, L. G.: Mechanika židkosti i gaza. Mašinostrojenije, Moskva: 1978, s. 202
    8. IVANTIŠIN, J.: Hydraulické a pneumatické mechanizmy. Bratislava: ALFA,: 1982, 220 s.
    9. KUNDRÁK, J.: Alternative machining procedures of hardened steels. Manufacturing Technology, December 2011, Vol.11, No.11, pp.32-39 Go to original source...
    10. MAKEDONSKI, A., OHRIDSKI, K,: Unconvential machining method for enhancing the durability of tools and strength of the specimens bonded. In: Manufacturing Technology, December 2011, Vol. 11, No.11 Go to original source...
    11. HOLEŠOVSKÝ, F., NÁPRSTKOVÁ, N., NOVÁK, M.: GISC for grinding process optimalization. In: Manufacturing Technology, 2012, Vol.12, Nr. 12 Go to original source...
    12. SZTANKOVICZ, I., KUNDRÁK, J.: Theoretical Value of Total Height of Profile in Rotational Turning. Applied Mechanics and Materials (ISSN: 1662-7482), Vol 309 (III Central European Conference on Logistics), 2013, pp. 154-161, doi: 10.4028/www.scientific.net/AMM.309.154

    Return to the content