Manufacturing Technology 2012, 12(1):22-26 | DOI: 10.21062/ujep/x.2012/a/1213-2489/MT/12/1/22

GICS for grinding process optimization

Holesovsky Frantisek, Naprstkova Natasa, Novak Martin
J. E. Purkyně University in Ústí nad Labem, Faculty of Production Technology and Management, Na Okraji 1001, 400 96 Ústí nad Labem, Czech Republic

The article deals with the automation of the grinding machine duty cycle. There are both described, the problems of the automation of the duty cycle and the present state summarised in this paper. The control systems of grinding cycle run from the experiences and process knowledge. Real GICS (Grinding Intelligent Control System) must be founded on the process monitoring and to create own control system with principal parameters of grinding. Cutting speed, workpiece motion speed, depth of cut, volume of coolant, course of cutting forces and other process parameters can form single control components at the adequate process knowledge. At some control systems description the authors assume the future possible direction of development, considering possibilities in the use of the expert and intelligent systems.

Keywords: grinding, grinding wheel, adaptive system, expert system, intelligent system

Published: June 1, 2012  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Holesovsky F, Naprstkova N, Novak M. GICS for grinding process optimization. Manufacturing Technology. 2012;12(1):22-26. doi: 10.21062/ujep/x.2012/a/1213-2489/MT/12/1/22.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. ALLANSON, D.R., KELLY,S., TERRY, S., MORUZZI, J.L., ROWE, W.B. Coping with Compliance in the Control of Grinding Processes. CIRP, 38/1/1989, p. 311-314 Go to original source...
    2. BRINKSMEIER,E.,WERNER,F. Monitoring of Grinding Wheel Wear, Annals of the CIRP, vol.41/1/1992, p.373-376 Go to original source...
    3. GUI J. LIU, YA D. GONG, WAN S. WANG Intelligent Monitor and Control System for Grinding Process. Key Engineering Materials, vol.304-305, 2006, pp.535-539 Go to original source...
    4. HOLEŠOVSKÝ F. Meaning of Time Course of Cutting Force at Cylindrical Grinding, TU Liberec, 1997, Thesis, pp.15-16, 55-57, 114-118
    5. HOLEŠOVSKÝ F. The Quality Control of the Surface at the Cylindrical Surface Grinding, Proceedings The 14th International Conference ICPR, Osaka 1997, Japan, pp.690-693
    6. HUANG, X., GAO, Y. A discrete system model for form error control in surface grinding. International Journal of Machine Tools and Manufacture, vol.50 (3), 2011, pp. 219-230 Go to original source...
    7. KOCMAN, K. Application of magnetic correlation analysis on the choice and correction of cutting parameters for automated manufacturing systems. Manufacturing Technology, vol.XI, 2011, pp. 28-32 Go to original source...
    8. LI, P., WANG, J. Automatic control system of grinding process. Proceedings of the 6th International Forum on Strategic Technology, IFOST 2011, art. no. 6021045, pp. 382-385
    9. LIU, G.J., GONG, Y.D., WANG, W.S. Intelligent monitor and control system for grinding process. Key Engineering Materials, vol. 304-305, 2006, pp. 535-539 Go to original source...
    10. LUKOVICS I., SÝKOROVÁ L. Determination of Cutting Property of Grinding Wheels forHigh Power Grinding, Tools 99, Zlín, 1999, p. 96-102
    11. MÁDL J., ČERMÁK J., VRABEC M. Computational techniques in Manufacturing Technology, Acta Polytechnica, ČVUT, 2000, vol.40, No.4, pp.94-100
    12. MARINESCU, D.I., HITCHINER, M. et al. Handbook of Machining with Grinding Wheels. CRC Press, 2007 Go to original source...
    13. NOBORU U, OBUCHI Y., MATSUO T., NOMURA H. Expert System for Grinding. Proceeding, Third International Grinding Conference, Fontana 1988, p. 622/1-11
    14. NOVAK, M. Surface quality of hardened steels after grinding. Manufacturing Technology, vol. 11, 2011, pp.55-59 Go to original source...
    15. NOVAK-MARCINČIN, J., KURIC, I., LEGUTKO, S., NOVÁKOVÁ, L. Computer Aided Technical Preparation of Production. University of Žilina, 2011
    16. ROWE W.B., CHEN X., MILLS B. Towards an Adaptive Strategy for Dressing in Grinding Operations, Proceedings of the 31st International Matador Conference
    17. TÖNSHOFF H.K., PETERS J., INASAKI I., PAUL T. Modelling and Simulation of Grinding Processes, Annals of the CIRP, vol.41/2/1992, p.677-688 Go to original source...

    Return to the content