Manufacturing Technology 2010, 10(1):39-45 | DOI: 10.21062/ujep/x.2010/a/1213-2489/MT/10/1/39

The wood requires orthogonal cutting

Karol Vasilko
Faculty of Manufacturing Technologies, Technical University of Košice, Bayerova 1, 080 01 Prešov, Slovak Republic

This paper deals with problems about the wood requires orthogonal cutting and its history and presents development.

Keywords: Parameter Rz, turning, wood

Published: December 1, 2010  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vasilko K. The wood requires orthogonal cutting. Manufacturing Technology. 2010;10(1):39-45. doi: 10.21062/ujep/x.2010/a/1213-2489/MT/10/1/39.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. GRANOVSKIJ, G. I., GRANOVSKIJ, V. G.: Rezanije metallov. Moskva: Vyššaja škola 1985, 304 s.
    2. HOSHI, K., HOSHI, T.: On the metal cutting mechanism with the built-up edge. Mem.Fac. Engineering. Hekkaide University 12, č.3, 1969
    3. KALPAKJIAN, S.: Manufacturing engineering and technology. New York: Addison Wesley Publishing Company, 1989, pp.1999, ISBN 0-201-12849-7.
    4. WEBER, H., LOLADZE, T.N.: Grundlagen des Spanens. Berlin: VEB Verlag Technik, 1986, 255 s.
    5. FELHÖ, Cs., KUNDRÁK, J.: Surface roughness determination in turning of cylindrical surfaces. In Manufacturing Technology, vol.. 9, December 2009, pp.16-22. ISSN 1213-2489. Go to original source...
    6. MÁDL, J,: Design for Machining. In Manufacturing Technology, vol.. 9, December 2009, pp.81-85. ISSN 1213-2489. Go to original source...
    7. Patent SR č. 211831, VASILKO, K., PILC, J.: Klzné uloženie rotujúceho sústružníckeho noža. 21.3.1980
    8. KOCH, P.: Woodmachining process, Ronald Prss Company. New York, 1964.
    9. LISIČAN, J.: Obrábanie a delenie drevných materiálov. AS VŠL Zvolen, 1998, ISBN 85-1644-88

    Return to the content