Manufacturing Technology 2012, 12(2):197-201 | DOI: 10.21062/ujep/x.2012/a/1213-2489/MT/12/2/197

Possibilities of the observation of chemical reactions during the preparation of intermetallics by reactive sintering

Pavel Novák, Alena Michalcová, Ivo Marek, Milena Voděrová, Dalibor Vojtěch
Department of Metals and Corrosion Engineering, Institute of Chemical Technology, Prague

During reactive sintering production of intermetallic compounds, the thermally-activated reactions usually proceed very rapidly. Therefore the description of the reaction mechanisms is a challenge for current scientists. This work presents four approaches, how to succeed in this task. Thermal analysis, reaction front quenching method, in situ diffraction analysis and process modelling are described.

Keywords: reactive sintering, powder metallurgy, microscopy, phase analysis, thermal analysis

Published: December 1, 2012  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Novák P, Michalcová A, Marek I, Voděrová M, Vojtěch D. Possibilities of the observation of chemical reactions during the preparation of intermetallics by reactive sintering. Manufacturing Technology. 2012;12(2):197-201. doi: 10.21062/ujep/x.2012/a/1213-2489/MT/12/2/197.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. T.B. MASSALSKI, Binary Alloy Phase Diagrams, ASM Int., Materials Park, 1990.
    2. M.H. CHEN, L. GAO, J.H. ZHOU, M. WANG, Application of reaction sintering to the manufacturing of a spacecraft combustion chamber of SiC ceramics, Journal of Materials Processing Technology, 192 (2002) 408-411. Go to original source...
    3. L. ZHAN, P. SHEN, Q. JIANG, The mechanism of combustion synthesis of (TiCxNy-TiB2)/Ni from a Ni-Ti-C-BN system, Powder Technology, 205 (2011) 52-60. Go to original source...
    4. P. NOVÁK, V. KNOTEK, J. ©ERÁK, A. MICHALCOVÁ, D. VOJTĚCH, Synthesis of Fe-Al-Si intermediary phases by reactive sintering, Powder Metallurgy, 54 (2009) 167-171. Go to original source...
    5. E. POCHEĆ, S. JÓ¬WIAK, K. KARCZEWSKI, Z. BOJAR, Fe-Al phase formation around SHS reactions under isothermal conditions, Journal of Alloys and Compounds, 509 (2011) 1124-1128. Go to original source...
    6. P. NOVÁK, A. MICHALCOVÁ, J. ©ERÁK, D. VOJTĚCH, T. FABIÁN, S. RANDÁKOVÁ, F. PRŮ©A, V. KNOTEK, M. NOVÁK, Preparation of Ti-Al-Si alloys by reactive sintering, Journal of Alloys and Compounds, 470 (2009) 123-126. Go to original source...
    7. P. NOVÁK, A. MICHALCOVÁ, M. VODĚROVÁ, M. ©ÍMA, J. ©ERÁK, D. VOJTĚCH, K. WIENEROVÁ, Effect of reactive sintering conditions on microstructure of Fe-Al-Si alloys, Journal of Alloys and Compounds, 493 (2010) 81-86. Go to original source...
    8. S. JÓ¬WIAK, K. KARCZEWSKI, Z. BOJAR, Kinetics of reactions in FeAl synthesis studied by the DTA technique and JMA model, Intermetallics, 18 (2010) 1332-1337. Go to original source...
    9. P. NOVÁK, A. MICHALCOVÁ, I. MAREK, M. MUDROVÁ, K. SAKSL, J. BEDNARČÍK, P. ZIKMUND, D. VOJTĚCH, On the formation of intermetallics in Fe-Al system - an in situ XRD study, Intermetallics, accepted (2012). Go to original source...
    10. C.L. YEH, C.C. HSU, An experimental study on Ti5Si3 formation by combustion synthesis in self-propagating mode, Journal of Alloys and Compounds, 395 (2005) 53-58. Go to original source...
    11. F. CHARLOT, F. BERNARD, E. GAFFET, D. KLEIN, J.C. NIEPCE, In situ time-resolved diffraction coupled with a thermal I.R. camera to study mechanically activated SHS reaction: Case of Fe+Al binary system, Acta Materialia, 47 (1999) 619-629. Go to original source...
    12. P. NOVÁK, J. KUBÁSEK, J. ©ERÁK, D. VOJTĚCH, A. MICHALCOVÁ, Mechanism and kinetics of the intermediary phase formation in Ti-Al and Ti-Al-Si systems during reactive sintering, International Journal of Materials Research, 100 (2009) 3. Go to original source...

    Return to the content