PT Journal
AU Vavro, J
   Vavro, J
   Marcek, L
   Kuricova, J
   Taraba, M
   Klimek, L
   Cernava, P
TI Analysis the Load of the Gantry Crane during Travelling along the Crane Track Using Working Model 3D
SO Manufacturing Technology Journal
PY 2025
BP 239
EP 243
VL 25
IS 2
DI 10.21062/mft.2025.018
DE Loading; Virtual model; Load; Stress analyse; 3D model
AB The paper presents the analysis of the gantry crane loading when driving along the crane track, using a Working model 3D, for which the analysis of the gantry crane frame loading was performed. The gantry crane is designed to remove dirt in front of the turbine under the water surface. For the gantry crane which moves along a track, the directional and vertical unevennesses were determined by experiment and are given in graphic and numerical form in (mm), relating to A track and B track with a total track length of 450 (m). Based on the knowledge of the unevenness of the rail track, the four random functional dependencies defining the irregularities of the individual rails as input variables were used for the kinematic excitation of the individual wheels of the gantry crane. The stress analysis was performed for a travel speed of 30 (m.min<sup>-1</sup>) and a lift of 10 (t) under the given loading. The results of the stress analysis are presented in graphic form.
ER