PT  - JOURNAL ARTICLE
AU  - Nová, Iva
AU  - Sobotka, Jiří
AU  - Fraňa, Karel
AU  - Solfronk, Pavel
AU  - Koreček, David
AU  - Nováková, Iva
TI  - Prediction of Foaming Process in the Production of Aluminium Foams
DP  - 2019 Aug 1
TA  - Manufacturing Technology Journal
PG  - 655--659
VI  - 19
IP  - 4
AID - 10.21062/ujep/350.2019/a/1213-2489/MT/19/4/655
IS  - 12132489
AB  - The paper deals with the physical-chemical effects of a blowing agent on production the cellular metal systems (in this case aluminium foams). Based on the isothermal concertation and pressure curves for the H-Ti system and by using the maximum gas volume obtained from equation of state, there was applied the blowing agent to 1 kg of AlSi12 aluminium alloy. Moreover, using relation to determine aluminium foam relative density (ρ REL) from alloy AlSi12, there was done prediction to determine density of 1 kg metal foam from AlSi12 alloy at different blowing agent contents from 0.1 up to 1.5 wt% of titanium hydride TiH 2. These isothermal calculations were compared with the density of aluminium foal from alloy AlSi12, which was produced by an industrial process. Basic mechanical properties were subsequently measured on the produced foam samples.