RT Journal Article
SR Electronic
A1 Blatnická, Mária
A1 Blatnický, Miroslav
A1 Dižo, Ján
A1 Sága, Milan
T1 Comparison of Analytical Stress Analysis and Numerical Calculation of Mobile Work Machine Part
JF Manufacturing Technology Journal
YR 2018
VO 18
IS 2
SP 190
OP 193
DO 10.21062/ujep/76.2018/a/1213-2489/MT/18/2/190
UL https://journalmt.com/artkey/mft-201802-0004.php
AB The aim of the article is to verify dimensions of the hydraulic arm column (the necessary cross-sectional area) by analytical dimensional calculation and thus to design a lifting rotary arm which will be located on the pick-up car body (Figure 1). After the analysis of dimensions, the next step is creation of the structure in FEM program and then a numerical analysis will be carried out for verification of stress in the structure already with the values that are not available for the preliminary design (e.g. the structure weight). The next step in the solution will be to import the proposed and by strength calculations checked geometry into the multibody system program, where the dynamic response of the structure will be monitored, depending on the size of the load and the movement possibilities of this mechanism.