RT Journal Article
SR Electronic
A1 Cepova, Lenka
A1 Sokova, Dagmar
A1 Malotova, Sarka
A1 Gapinski, Bartosz
A1 Cep, Robert
T1 Evaluation of Cutting Forces and Surface Roughness after Machining of Selected Materials
JF Manufacturing Technology Journal
YR 2016
VO 16
IS 1
SP 45
OP 48
DO 10.21062/ujep/x.2016/a/1213-2489/MT/16/1/45
UL https://journalmt.com/artkey/mft-201601-0009.php
AB This article deals with the evaluation of changes in mean values of the individual components of cutting forces and measuring the roughness parameters after machining variable cutting conditions such as cutting speed and feed rate. Were evaluated 3 materials from different classes' machinability: steel 14109, alloy CuZn40Pb2 and brass AlCu4PbMg. The materials have been chosen with respect to their use in the extrusion method of the ECAP. The experiment was carried out on the machine SUI 40, the forces were measured on a dynamometer KISTLER 9441 and on the roughness equipment Hommel Tester T2000. All measurements will be evaluated in tables and graphs. The results could be used in abbreviated testing machinability as indicative.